<aside> <img src="/icons/info-alternate_gray.svg" alt="/icons/info-alternate_gray.svg" width="40px" /> This is a Fellesverkstedet how-to-use guide explaining how different machines and workshops work. This is still under development, send any suggestions or feedback to [email protected]
</aside>
Table saw
Band saw
Table router
Thickness planer
Jointer
Drill press
Miter saw
Belt Sander
Manual orbital sander
Lamello machine
Heat gun
Drills
Hammer drill
Angle grinder
Nail gun
Jigsaw
<aside> <img src="/icons/info-alternate_gray.svg" alt="/icons/info-alternate_gray.svg" width="40px" />
The metal workshop is still under development so any feedback on what could or should be improved is much appreciated. We won’t be able to do everything we or you would like to do, but we’ll do our best to make and adjust our plans based on feedback.
</aside>
Safety equipment metal workshop
<aside> <img src="/icons/info-alternate_gray.svg" alt="/icons/info-alternate_gray.svg" width="40px" />
As the metal workshop is still under development, the machines and equipment listed here might be outdated. We’re still on the lookout for new equipment so if the things you need are not listed here below, we might actually have it and if not we want to hear about your interest in it!
</aside>
Tig welder (Kemppi mls 2300 acdc)
Mig/Mag welder (ESAB )
Bandsaw horisontal
Angle grinders
Plasma cutter: Powermax45 XP
Bandsaw vertical
Basic manual metal bender
Basic manual metal sheet cutter