The following settings have been tested for the Epilog Fusion Pro 36 at Fellesverkstedet.

It's best to first do a test cut to double check the settings work. In case these settings don't work, it could be necessary to go over the laser and do some general maintenance (link to wiki page).

To edit the settings simply change the values when deciding the process in the Epilog Dashboard - you can export your settings to save for next time if you wish

Red Colour is used to vector cut, blue is used for vector engraving, and black color is used for engraving. For more detailed information about laser cutter preparation go to Laser file preparation (link to wiki page).

Struckthrough text yet to be tested

Acrylic

Engrave: Speed 80 Power 100

Single-line engrave: Speed 50 Power 100

0.7 mm

Cut: Speed 4 Power 100

2 mm

Cut: Speed 1.5 Power 100

3 mm

Cut: Speed 1 Power 100

4 mm

Cut: Speed 0.7 Power 100

5 mm